Snmp Trap Link-Status - Dell MXL 10GbE Reference Manual

Parameters
view-name
oid-tree
included
excluded
Defaults none
Command CONFIGURATION
Modes
Command
Version 8.3.16.1
History
Usage The oid-tree variable is a full sub-tree starting from 1.3.6 and cannot specify the
Information
name of a sub-tree or a MIB. The following Example configures a view named
rview that allows access to all objects under 1.3.6.1.
Example
Dell#(conf) snmp-server view rview 1.3.6.1 included
Related show running-config
Commands

snmp trap link-status

Enable the interface to send SNMP link traps, which indicate whether the interface is up or down.
Syntax
snmp trap link-status
To disable sending link trap messages, use the no snmp trap link-status
command.
Defaults Enabled.
Command INTERFACE
Modes
Command
Version 8.3.16.1
History
Usage If the interface is expected to flap during normal usage, you could disable this
Information command.
Simple Network Management Protocol (SNMP) and Syslog
Enter the name of the view (not to exceed 20 characters).
Enter the OID sub tree for the view (not to exceed 20
characters).
(OPTIONAL) Enter the keyword included to include the MIB
family in the view.
(OPTIONAL) Enter the keyword excluded to exclude the
MIB family in the view.
Introduced on the MXL 10/40GbE Switch IO Module.
— displays the SNMP running configuration.
Introduced on the MXL 10/40GbE Switch IO Module.
1239