Table of Contents
Advertisement
Parameters
ip-address
mask
longer-prefixes
list prefix-list
process-id
connected
all
static
summary
Command
•
Modes
•
Command
Version 8.3.16.1
History
Usage
The following describes the show ip route all command in the following
Information
example.
Field
(undefined)
IPv4 Routing
(OPTIONAL) Specify a name of a device or the IP address of
the device to view more detailed information about the
route.
(OPTIONAL) Specify the network mask of the route. Use this
parameter with the IP address parameter.
(OPTIONAL) Enter the keywords longer-prefixes to view
all routes with a common prefix.
(OPTIONAL) Enter the keyword list and the name of a
configured prefix list. For more information, refer to the
show ip route list
(OPTIONAL) Specify that only OSPF routes with a certain
process ID must be displayed.
(OPTIONAL) Enter the keyword connected to view only the
directly connected routes.
(OPTIONAL) Enter the keyword all to view both active and
non-active routes.
(OPTIONAL) Enter the keyword static to view only routes
the ip route command configures.
(OPTIONAL) Enter the keyword summary. For more
information, refer to the
EXEC
EXEC Privilege
Introduced on the MXL 10/40GbE Switch IO Module.
Description
Identifies the type of route:
•
C = connected
•
S = static
•
R = RIP
•
B = BGP
•
IN = internal BGP
•
EX = external BGP
•
LO = Locally Originated
•
O = OSPF
•
IA = OSPF inter area
•
N1 = OSPF NSSA external type 1
command.
show ip route summary
command.
647
Advertisement
Table of Contents
