Command
CLASS-MAP
Modes
Command
Version 8.3.16.1
History
Usage
To access this command, enter the class-map command. After the class map is
Information
identified, you can configure the match criteria.
Related
class-map
Commands
match mac dot1p
Configure a match criterion for a class map based on a dot1p value.
Syntax
match mac dot1p {dot1p-list}
Parameters
dot1p-list
Defaults
none
Command
CLASS-MAP
Modes
Command
Version 8.3.16.1
History
Usage
To access this command, enter the class-map command. After the class map is
Information
identified, you can configure the match criteria.
Related
class-map
Commands
match mac vlan
Configure a match criterion for a class map based on VLAN ID.
Syntax
match mac vlan number
Parameters
number
Defaults
none
Command
CLASS-MAP
Modes
Quality of Service (QoS)
Introduced on the MXL 10/40GbE Switch IO Module.
— identifies the class map.
Enter a dot1p value. The range is from 0 to 7.
Introduced on the MXL 10/40GbE Switch IO Module.
— identifies the class map.
Enter the VLAN ID. The range is from 1 to 4094.
1087