Table of Contents
Advertisement
Parameters
interface
interface
ip ip-address
mask
macaddress
mac-address
mask
static
dynamic
summary
Command
EXEC Privilege
Modes
Command
Version 9.4.0.0
History
Version 8.3.16.1
Usage
The following example shows two VLANs that are associated with a private VLAN
Information
(PVLAN) (refer to
If you have entered the 'clear arp-cache' command to remove a large
number of ARP entries and the command is still being processed in the
background, an error message is displayed as follows if you attempt to enter the
'show arp' command: "Clear arp in-progress.Please try after
sometime!
The following describes the show arp command shown in the following example.
Row Heading
Protocol
636
(OPTIONAL) Enter the following keywords and slot/port or
number information:
•
For the Management interface, enter the keyword
managementethernet then the slot/port information.
•
For a Port Channel interface, enter the keyword port-
channel then a number. The range is from 1 to 128.
•
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
•
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
•
For a VLAN, enter the keyword vlan then a number from
1 to 4094.
(OPTIONAL) Enter the keyword ip then an IP address in the
dotted decimal format. Enter the optional IP address mask in
the slash prefix format (/ x).
(OPTIONAL) Enter the keyword macaddress then a MAC
address in nn:nn:nn:nn:nn:nn format. Enter the optional
MAC address mask in nn:nn:nn:nn:nn format also.
(OPTIONAL) Enter the keyword static to view entries
entered manually.
(OPTIONAL) Enter the keyword dynamic to view dynamic
entries.
(OPTIONAL) Enter the keyword summary to view a summary
of ARP entries.
Added usage information for Clear arp-cache.
Introduced on the MXL 10/40GbE Switch IO Module.
Private VLAN
(PVLAN).
Description
Displays the protocol type.
IPv4 Routing
Advertisement
Table of Contents
