Disable - Dell MXL 10GbE Reference Manual

packet
brief
detail
tx
rx
both
Defaults none
Command EXEC Privilege
Modes
Command
Version 9.2(0.0)
History
Version 8.3.16.1

disable

Enable or disable LLDP.
Syntax
disable
To enable LLDP, use the no disable command.
Defaults Enabled, that is no disable.
Command CONFIGURATION (conf-lldp) and INTERFACE (conf-if-interface-lldp)
Modes
Command
Version 9.2(0.0)
History
Version 8.3.16.1
Related
protocol lldp (Configuration)
Commands
debug lldp interface
show lldp neighbors
PMUX Mode of the MXL 10/40GbE Switch I/O Module
(OPTIONAL) Enter the keyword packet to display
information regarding packets coming in or going out.
(OPTIONAL) Enter the keyword brief to display brief packet
information.
(OPTIONAL) Enter the keyword detail to display detailed
packet information.
(OPTIONAL) Enter the keyword tx to display transmit-only
packet information.
(OPTIONAL) Enter the keyword rx to display receive-only
packet information.
(OPTIONAL) Enter the keyword both to display both receive
and transmit packet information.
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Introduced on the MXL 10/40GbE Switch IO Module.
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Introduced on the MXL 10/40GbE Switch IO Module.
— enables LLDP globally.
— debugs LLDP.
— displays the LLDP neighbors.
1499