Multi-Topology - Dell MXL 10GbE Reference Manual

Parameters
narrow
transition
wide
level-1
level-2
Defaults narrow; if no Level is specified, Level-1 and Level-2 are configured.
Command ROUTER ISIS
Modes
Command
Version 9.2(0.0)
History
Usage
If you enter the metric-style wide command, the system generates and
Information
accepts only new-style TLVs. The router uses less memory and other resources
rather than generating both old-style and new-style TLVs.
The new-style TLVs have wider metric fields than old-style TLVs.
Related isis metric
Commands

multi-topology

Enables multi-topology IS-IS. It also allows enabling/disabling of old and new style TLVs for IP prefix
information in the LSPs.
Syntax
multi-topology [transition]
To return to a single topology configuration, use the no multi-topology
[transition] command.
Defaults Disabled
Command CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6
Modes
Command
Version 9.2(0.0)
History
822
Allows you to generate and accept old-style TLVs. The
metric range is from 0 to 63.
Allows you to generate both old-style and new-style TLVs.
The metric range is from 0 to 63.
Allows you to generate and accept only new-style TLVs. The
metric range is from 0 to 16777215.
Enables the metric style on Level 1.
Enables the metric style on Level 2.
Introduced on the MXL 10/40GbE Switch IO Module.
— configures a metric for an interface.
Introduced on the MXL 10/40GbE Switch IO Module.
Intermediate System to Intermediate System (IS-IS)