Defaults
All interfaces in Layer 2 mode are untagged.
Command
INTERFACE VLAN
Modes
Command
Version 8.3.16.1
History
Usage
Untagged interfaces can only belong to one VLAN.
Information
In the Default VLAN, you cannot use the no untagged interface command. To
remove an untagged interface from all VLANs, including the Default VLAN, enter
INTERFACE mode and use the no switchport command.
Related
interface vlan
Commands
tagged
864
Introduced on the MXL 10/40GbE Switch IO Module.
— configures a VLAN.
— specifies which interfaces in a VLAN are tagged.
Layer 2