ip vlan-flooding
Enable unicast data traffic flooding on VLAN member ports.
Syntax
ip vlan-flooding
To disable, use the no ip vlan-flooding command.
Command
CONFIGURATION
Modes
Command
Version 9.3(0.0)
History
Default
Disabled
Usage
By default this command is disabled. There might be some ARP table entries which
Information
are resolved through ARP packets which had Ethernet MAC SA different from MAC
information inside the ARP packet. This unicast data traffic flooding occurs only for
those packets which use these ARP entries.
886
Introduced on the MXL 10/40GbE Switch IO Module
platform.
Microsoft Network Load Balancing