Show Qos Dcb-Input - Dell MXL 10GbE Reference Manual

--------------------------------------------------------
0
1
2
3
4
5
6
7

show qos dcb-input

Displays the PFC configuration in a DCB input policy.
Syntax
show qos dcb-input [pfc-profile]
Parameters
pfc-profile
Command CONFIGURATION
Modes
Command
Version 9.2(0.0)
History
Version 8.3.16.1
Usage
Information
Example
Dell(conf)# show qos dcb-input
dcb-input pfc-profile
dcb-input pfc-profile1
show qos dcb-output
Displays the ETS configuration in a DCB output policy.
Syntax
show qos dcb-output [ets-profile]
Parameters
[ets-profile]
Command EXEC Privilege
Modes
Command
Version 9.2(0.0)
History
PMUX Mode of the MXL 10/40GbE Switch I/O Module
0
0
0
0
0
0
0
0
Enter the PFC profile.
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Introduced on the MXL 10/40GbE Switch IO Module.
NOTE: Please note that Dell Networking does not recommended to use this
command as it has been deprecated in the current 9.4(0.0) release. A warning
message appears when you try to run this command indicating that you have
to use the dcb-map commands in the future.
pfc link-delay 32
pfc priority 0-1
no pfc mode on
pfc priority 6-7
Enter the ETS profile.
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
1453