Dell MXL 10GbE Reference Manual page 983

key-
encryption-
algorithm
key
authentication-
algorithm
key-
encryption-
type
key
null
Defaults Not configured.
Command ROUTER OSPFv3
Modes
Command
Version 9.2(0.0)
History
Usage
Before you enable IPsec encryption on an OSPFv3 interface, first enable OSPFv3
Information
globally on the router. Configure the same encryption policy (same SPI and keys)
on each interface in an OSPFv3 link.
An SPI value must be unique to one IPsec security policy (authentication or
encryption) on the router.
When you configure encryption for an OSPFv3 area with the area encryption
command, you enable both IPsec encryption and authentication. However, when
Open Shortest Path First (OSPFv2 and OSPFv3)
(OPTIONAL) Specifies if the key is encrypted.
Valid values: 0 (key is not encrypted) or 7 (key is encrypted).
Text string used in encryption.
The required lengths of a non-encrypted or encrypted key
are:
3DES - 48 or 96 hex digits; DES - 16 or 32 hex digits; AES-
CBC -32 or 64 hex digits for AES-128 and 48 or 96 hex digits
for AES-192.
Specifies the authentication algorithm to use for encryption.
Valid values are MD5 or SHA1.
(OPTIONAL) Specifies if the authentication key is encrypted.
Valid values: 0 (key is not encrypted) or 7 (key is encrypted).
Text string used in authentication.
For MD5 authentication, the key must be 32 hex digits (non-
encrypted) or 64 hex digits (encrypted).
For SHA-1 authentication, the key must be 40 hex digits
(non-encrypted) or 80 hex digits (encrypted).
Causes an encryption policy configured for the area to not
be inherited on the interface.
Introduced on the MXL 10/40GbE Switch IO Module.
983