Area Nssa - Dell MXL 10GbE Reference Manual

Parameters
area-id
cost
Defaults cost = 1; no areas are configured.
Command ROUTER OSPF
Modes
Command
Version 8.3.16.1
History
Usage In the Dell Networking operating software, cost is defined as reference bandwidth.
Information
Related area stub
Commands

area nssa

Specify an area as a not so stubby area (NSSA).
Syntax
area area-id nssa [default-information-originate] [no-
redistribution] [no-summary]
To delete an NSSA, use the no area area-id nssa command.
Parameters
area-id
no-
redistribution
default-
information-
originate
no-summary
Defaults Not configured.
Command ROUTER OSPF
Modes
Command
Version 8.3.16.1
History
Open Shortest Path First (OSPFv2 and OSPFv3)
Specify the OSPF area in dotted decimal format (A.B.C.D.) or
enter a number from zero (0) to 65535.
Specifies the stub area's advertised external route metric. The
range is from zero (0) to 65535.
Introduced on the MXL 10/40GbE Switch IO Module.
— creates a stub area.
Specify the OSPF area in dotted decimal format (A.B.C.D.) or
enter a number from zero (0) to 65535.
(OPTIONAL) Specify that the redistribute command does
not distribute routes into the NSSA. Only use this command
in an NSSA area border router (ABR).
(OPTIONAL) Allows external routing information to be
imported into the NSSA by using Type 7 default.
(OPTIONAL) Specify that no summary LSAs should be sent
into the NSSA.
Introduced on the MXL 10/40GbE Switch IO Module.
925