Show Cam-Acl - Dell MXL 10GbE Reference Manual

this capability, traffic with particular flows that are traversing through the ingress
and egress interfaces are examined and, appropriate ACLs can be applied in both
the ingress and egress direction. Flow-based monitoring conserves bandwidth by
monitoring only specified traffic instead all traffic on the interface. This feature is
particularly useful when looking for malicious traffic. It is available for Layer 2 and
Layer 3 ingress and egress traffic. You may specify traffic using standard or
extended access-lists. This mechanism copies all incoming or outgoing packets on
one port and forwards (mirrors) them to another port. The source port is the
monitored port (MD) and the destination port is the monitoring port (MG).

show cam-acl

Show space allocated for IPv6 ACLs.
Syntax
show cam-acl
Command
•
Modes
•
Command
Version 9.2(0.0)
History
Example
show cam-acl (non default)
Dell(conf)#cam-acl l2acl 2 ipv4acl 4 ipv6acl 4 ipv4qos 2 l2qos
1 l2pt 0 ipmacacl 0 vman-qos 0 ecfmacl
Dell#show cam-acl
-- Chassis Cam ACL --
L2Acl
Ipv4Acl
Ipv6Acl
Ipv4Qos
L2Qos
L2PT
IpMacAcl
VmanQos
VmanDualQos
EcfmAcl
FcoeAcl
iscsiOptAcl
ipv4pbr
vrfv4Acl
Openflow
fedgovacl
-- stack-unit 0 --
L2Acl
Ipv4Acl
Ipv6Acl
Ipv4Qos
IPv6 Access Control Lists (IPv6 ACLs)
EXEC
EXEC Privilege
Introduced on the MXL 10/40GbE Switch IO Module.
Current Settings(in block sizes)
1 block = 128 entries
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Current Settings(in block sizes)
1 block = 128 entries
:
:
:
:
0
2
4
4
2
1
0
0
0
0
0
0
0
0
0
0
F3940
2
4
4
2
671