Debug Ip Bgp Ipv6 Unicast Soft-Reconfiguration - Dell MXL 10GbE Reference Manual

debug ip bgp ipv6 unicast soft-reconfiguration

Enable soft-reconfiguration debugging for IPv6 unicast routes.
Syntax
debug ip bgp [ipv4-address | ipv6-address | peer-group-name]
ipv6 unicast soft-reconfiguration
To disable debugging, use the no debug ip bgp [ipv4-address | ipv6-
address | peer-group-name] ipv6 unicast soft-reconfiguration
command.
Parameters
ipv4-address |
ipv6-address
peer-group-
name
ipv6 unicast
Defaults Disabled.
Command EXEC Privilege
Modes
Command
Version 9.2(0.0)
History
Usage
This command turns on BGP soft-reconfiguration inbound debugging for IPv6
Information
unicast routes. If no neighbor is specified, debug is turned on for all neighbors.
Related show ip bgp ipv6 unicast dampened-paths
Commands
debug ip bgp keepalives
Allows you to view information about BGP keepalive messages.
Syntax
debug ip bgp [ipv6-address | peer-group peer-group-name]
keepalives [in | out]
To disable debugging, use the no debug ip bgp [ip-address | peer-group
peer-group-name] keepalives [in | out] command.
Parameters
ipv6-address
716
Enter the IP address of the neighbor on which you want to
enable soft-reconfiguration debugging.
Enter the name of the peer group on which you want to
enable soft-reconfiguration debugging.
Debug soft reconfiguration for IPv6 unicast routes.
Introduced on the MXL 10/40GbE Switch IO Module.
— views BGP dampened routes.
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format
then the prefix length in the /x format. The range is /0 to /
128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
IPv6 Border Gateway Protocol (IPv6 BGP)