Logging History - Dell MXL 10GbE Reference Manual

Related
logging
Commands
logging on

logging history

Specify which messages are logged to the history table of the switch and the SNMP network
management station (if configured).
Syntax
logging history level
To return to the default values, use the no logging history command.
Parameters
level
Defaults warnings or 4
Command CONFIGURATION
Modes
Command
Version 8.3.16.1
History
Usage When you configure the snmp-server trap-source command, the system
Information
messages logged to the history table are also sent to the SNMP network
management station.
Related
show logging
Commands
logging history size
Specify the number of messages stored in the system logging history table.
Syntax
logging history size size
To return to the default values, use the no logging history size command.
Parameters
size
Defaults 1 message
1246
— enables logging to a Syslog server.
— enables logging.
Indicate a value from 0 to 7 or enter one of the following
equivalent words: emergencies, alerts, critical,
errors, warnings, notifications, informational, or
debugging. The default is 4 or warnings.
Introduced on the MXL 10/40GbE Switch IO Module.
— displays information logged to the history buffer.
Indicate a value as the number of messages to be stored.
The range is from 0 to 500. The default is 1 message.
Simple Network Management Protocol (SNMP) and Syslog