show ip pim interface
View information on the interfaces with IP PIM enabled.
Syntax
show ip pim interface
Command
•
Modes
•
Command
Version 9.2(0.0)
History
Usage
The following describes the show ip pim interface command shown in the
Information
following example.
Field
Address
Interface
Ver/Mode
Nbr Count
Query Intvl
DR Prio
DR
Example
E600-7-RPM0#show ip pim interface
Address
172.21.200.254 Gi 7/9
172.60.1.2
192.3.1.1
192.4.1.1
172.21.110.1
172.21.203.1
1024
EXEC
EXEC Privilege
Introduced on the MXL 10/40GbE Switch IO Module.
Description
Lists the IP addresses of the interfaces participating in PIM.
List the interface type, with either slot/port information or ID
(VLAN or Port Channel), of the interfaces participating in
PIM.
Displays the PIM version number and mode for each
interface participating in PIM:
•
v2 = PIM version 2
•
S = PIM Sparse mode
Displays the number of PIM neighbors discovered over this
interface.
Displays the query interval for Router Query messages on
that interface (configured with ip pim query-interval
command).
Displays the Designated Router priority value configured on
the interface (use the ip pim dr-priority command).
Displays the IP address of the Designated Router for that
interface.
Interface Ver/ Nbr
Gi 7/11
Gi 7/16
Gi 13/5
Gi 13/6
Gi 13/7
Query DR
Mode Count Intvl Prio
v2/S 0
30 1
172.21.200.254
v2/S 0
30 1
172.60.1.2
v2/S 1
30 1
192.3.1.1
v2/S 0
30 1
192.4.1.1
v2/S 0
30 1
172.21.110.1
v2/S 0
30 1
172.21.203.1
DR
PIM-Sparse Mode (PIM-SM)