logging facility
Configure the Syslog facility used for error messages sent to Syslog servers.
Syntax
logging facility [facility-type]
To return to the default values, use the no logging facility command.
Parameters
facility-type
Defaults
local7
Command
CONFIGURATION
Modes
Command
Version 8.3.16.1
History
Simple Network Management Protocol (SNMP) and Syslog
(OPTIONAL) Enter one of the following parameters:
•
auth (authorization system)
•
cron (Cron/at facility)
•
deamon (system deamons)
•
kern (kernel)
•
local0 (local use)
•
local1 (local use)
•
local2 (local use)
•
local3 (local use)
•
local4 (local use)
•
local5 (local use)
•
local6 (local use)
•
local7 (local use)
•
lpr (line printer system)
•
mail (mail system)
•
news (USENET news)
•
sys9 (system use)
•
sys10 (system use)
•
sys11 (system use)
•
sys12 (system use)
•
sys13 (system use)
•
sys14 (system use)
•
syslog (Syslog process)
•
user (user process)
•
uucp (Unix to Unix copy process)
The default is local7.
Introduced on the MXL 10/40GbE Switch IO Module.
1245