Clear Lldp Counters - Dell MXL 10GbE Reference Manual

Parameters
system-
capabilities
system-
description
system-name
Defaults none
Command CONFIGURATION (conf-lldp)
Modes
Command
Version 9.2(0.0)
History
Version 8.3.16.1
Usage The command options system-capabilities, system-description, and
Information
system-name can be invoked individually or together, in any sequence.

clear lldp counters

Clear LLDP transmitting and receiving counters for all physical interfaces or a specific physical interface.
Syntax
clear lldp counters interface
Parameters
interface
Defaults none
Command EXEC Privilege
Modes
Command
Version 9.2(0.0)
History
Version 8.3.16.1
PMUX Mode of the MXL 10/40GbE Switch I/O Module
Enter the keywords system-capabilities to advertise the
system capabilities TLVs to the LLDP peer.
Enter the keywords system-description to advertise the
system description TLVs to the LLDP peer.
Enter the keywords system-name to advertise the system
name TLVs to the LLDP peer.
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Introduced on the MXL 10/40GbE Switch IO Module.
Enter the following keywords and slot/port or number
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
tenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Introduced on the MXL 10/40GbE Switch IO Module.
1497