Dell MXL 10GbE Reference Manual page 1153

Parameters
system
exec
commands
{level| role
role-name}
name | default
start-stop
wait-start
stop-only
tacacs+
Defaults none
Command CONFIGURATION
Modes
Command
Version 9.5(0.0)
History
Version 8.3.16.1
Usage
In the example above, TACACS+ accounting is used to track all usage of EXEC
Information
command and commands on privilege level 15.
Privilege level 15 is the default. If you want to track usage at privilege level 1 for
example, use the aaa accounting command 1 command.
Example
Dell(conf)# aaa accounting exec default start-stop tacacs+
Dell(conf)# aaa accounting command 15 default start-stop tacacs
+
Dell(config)#
Security
Enter the keyword system to send accounting information
of any other AAA configuration.
Enter the keyword exec to send accounting information
when a user has logged in to EXEC mode.
Enter the keyword command then a privilege level for
accounting of commands executed at that privilege level or
enter the keyword role then the role name for accounting
of commands executed by a user with that user role.
Enter one of the following:
• For name, enter a user-defined name of a list of
accounting methods.
• For default, the default accounting methods used.
Enter the keywords start-stop to send a "start accounting"
notice at the beginning of the requested event and a "stop
accounting" notice at the end of the event.
Enter the keywords wait-start to ensure that the TACACS
+ security server acknowledges the start notice before
granting the user's process request.
Enter the keywords stop-only to instruct the TACACS+
security server to send a "stop record accounting" notice at
the end of the requested user process.
Enter the keyword tacacs+ to use TACACS+ data for
accounting. The Dell Networking OS currently supports only
TACACS+ accounting.
Introduced the support for roles on the MXL 10/40GbE
Switch.
Introduced on the MXL 10/40GbE Switch IO Module.
1153