Command
Version 8.3.16.1
History
Usage
To clear Layer 3 CAM inconsistencies, use this command.
Information
Related
show ip fib stack-unit
Commands
clear ip route
Clear one or all routes in the routing table.
Syntax
clear ip route {* | ip-address mask}
Parameters
*
ip-address
mask
Command
EXEC Privilege
Modes
Command
Version 8.3.16.1
History
Related
ip route
Commands
show ip route
show ip route summary
clear tcp statistics
Clear TCP counters.
Syntax
clear tcp statistics
Command
EXEC Privilege
Modes
Command
Version 8.3.16.1
History
IPv4 Routing
Introduced on the MXL 10/40GbE Switch IO Module.
CAUTION: Executing this command causes traffic disruption.
— shows FIB entries.
Enter an asterisk (*) to clear all learned IP routes.
Enter a specific IP address and mask in dotted decimal
format to clear that IP address from the routing table.
Introduced on the MXL 10/40GbE Switch IO Module.
— assigns an IP route to the switch.
— views the routing table.
— views a summary of the routing table.
Introduced on the MXL 10/40GbE Switch IO Module.
617