Radius-Server Timeout - Dell MXL 10GbE Reference Manual

radius-server timeout

To reply to a request, configure the amount of time the RADIUS client (the switch) waits for a RADIUS
host server .
Syntax
radius-server timeout seconds
To return to the default value, use the no radius-server timeout command.
Parameters
seconds
Defaults 5 seconds
Command CONFIGURATION
Modes
Command
Version 8.3.16.1
History
Related radius-server host
Commands
role
Changes command permissions for roles.
Syntax role mode { { { addrole | deleterole } role-name } | reset } command
To delete access to a command, use the no role mode role-name
Parameters
mode
Security
Enter the number of seconds between an unsuccessful
attempt and the system times out. The range is from zero (0)
to 1000 seconds. The default is 5 seconds.
Introduced on the MXL 10/40GbE Switch IO Module.
— configures a RADIUS host.
Enter one of the following keywords as the mode for which
you are controlling access:
configure for CONFIGURATION mode
exec for EXEC mode
interface for INTERFACE modes
line for LINE mode
route-map for Route-map mode
router for Router mode
1179