Description - Dell MXL 10GbE Reference Manual

Command EXEC Privilege
Modes
Command
Version 9.3(0.0)
History
Usage If you do not use the statistics parameter, both hardware and DCBx counters
Information clear.

description

Enter a text description of the DCB policy (PFC input or ETS output).
Syntax
description text
To remove the text description, use the no description command.
Parameters
text
Defaults none
Command
•
Modes
•
Command
Version 9.3(0.0)
History
pfc link-delay
Configure the link delay used to pause specified priority traffic.
Syntax
pfc link-delay value
To remove the link delay, use the no pfc link-delay command.
Parameters
value
Defaults 45556 quantum
Command DCB INPUT POLICY
Modes
Command
Version 9.3(0.0)
History
1396
Introduced on the FC Flex IO module installed in the MXL
10/40GbE Switch.
Enter the description of the output policy. The maximum is
32 characters.
DCB INPUT POLICY
DCB OUTPUT POLICY
Introduced on the FC Flex IO module installed in the MXL
10/40GbE Switch.
The range is (in quanta) from 712 to 65535. One quantum is
equal to a 512-bit transmission.
Introduced on the MXL 10/40GbE Switch with the FC Flex IO
module.
FC Flex IO Modules