Dell MXL 10GbE Reference Manual page 1447

Field
Admin mode
Admin Parameters
Remote
Parameters
Local Parameters
Operational status
(local port)
ETS DCBX Oper
status
State Machine
Type
Conf TLV Tx
Status
ETS TLV Statistic:
Input Conf TLV
pkts
ETS TLV Statistic:
Output Conf TLV
pkts
ETS TLV Statistic:
Error Conf TLV
pkts
Example
Dell(conf)# show interfaces te 0/0 ets summary
(Summary)
Interface TenGigabitEthernet 0/0
PMUX Mode of the MXL 10/40GbE Switch I/O Module
Description
ETS mode: on or off. When on, the scheduling and
bandwidth allocation configured in an ETS output policy or
received in a DCBX TLV from a peer can take effect on an
interface.
ETS configuration on local port, including priority groups,
assigned dot1p priorities, and bandwidth allocation.
ETS configuration on remote peer port, including admin
mode (enabled if a valid TLV was received or disabled),
priority groups, assigned dot1p priorities, and bandwidth
allocation. If ETS admin mode is enabled on the remote port
for DCBX exchange, the Willing bit received in ETS TLVs
from the remote peer is included.
ETS configuration on local port, including admin mode
(enabled when a valid TLV is received from a peer), priority
groups, assigned dot1p priorities, and bandwidth allocation.
Port state for current operational ETS configuration:
• Init: Local ETS configuration parameters were
exchanged with the peer.
• Recommend: Remote ETS configuration parameters were
received from the peer.
• Internally propagated: ETS configuration
parameters were received from the configuration
source.
Operational status of the ETS configuration on the local
port: match or mismatch.
Type of state machine used for DCBX exchanges of ETS
parameters: Feature — for legacy DCBX versions;
Asymmetric — for an IEEE version.
Status of ETS Configuration TLV advertisements: enabled or
disabled.
Number of ETS Configuration TLVs received.
Number of ETS Configuration TLVs transmitted.
Number of ETS Error Configuration TLVs received.
1447