Table of Contents
Advertisement
debug isis local-updates
To debug IS-IS local update packets, enable debugging on a specific interface and provides diagnostic
information.
Syntax
debug isis local-updates [interface]
To turn off debugging, use the no debug isis local-updates [interface]
command.
Parameters
interface
Command
EXEC Privilege
Modes
Command
Version 9.2(0.0)
History
debug isis snp-packets
To debug IS-IS complete sequence number PDU (CSNP) and partial sequence number PDU (PSNP)
packets, enable debugging on a specific interface and provides diagnostic information.
Syntax
debug isis snp-packets [interface]
To turn off debugging, use the no debug isis snp-packets [interface]
command.
Parameters
interface
Intermediate System to Intermediate System (IS-IS)
(OPTIONAL) Identifies the interface type slot/port as one of
the following:
•
For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
•
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
•
For a VLAN, enter the keyword vlan then a number from
1 to 4094.
Introduced on the MXL 10/40GbE Switch IO Module.
(OPTIONAL) Identifies the interface type slot/port as one of
the following:
•
For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
•
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
•
For a VLAN, enter the keyword vlan then a number from
1 to 4094.
797
Advertisement
Table of Contents
