Qos-Policy-Output - Dell MXL 10GbE Reference Manual

When changing a Service-Queue configuration in a QoS policy map, all QoS rules
are deleted and re-added automatically to ensure that the order of the rules is
maintained. As a result, the Matched Packets value shown in the show qos
statistics command is reset.
Related rate police
Commands

qos-policy-output

Create a QoS output policy.
Syntax
qos-policy-output qos-policy-name
To remove an existing output QoS policy, use the no qos-policy-output qos-
policy-name command.
Parameters
qos-policy-
name
Defaults none
Command CONFIGURATION
Modes
Command
Version 8.3.16.1
History
Usage
To specify the name of the output QoS policy, use this command. After the output
Information
policy is specified, rate-limit, bandwidth-percentage, and WRED can be defined.
This command enables Qos-Policy-Output Configuration mode — (conf-qos-
policy-out).
Related
bandwidth-percentage
Commands
rate police
Police the incoming traffic rate on the selected interface.
Syntax
rate police [kbps] committed-rate [burst-KB] [peak [kbps] peak-
rate [burst-KB]]
Parameters
kbps
Quality of Service (QoS)
— incoming traffic policing function.
Enter your output QoS policy name in character format (32
characters maximum).
Introduced on the MXL 10/40GbE Switch IO Module.
— assigns weight to the class/queue percentage.
Enter the keyword kbps to specify the rate limit in Kilobits
per second (Kbps). Make the following value a multiple of 64.
1091