Dell MXL 10GbE Reference Manual page 1284

Parameters
time-zone
start-week
start-day
start-month
start-time
end-week
end-day
end-month
end-time
offset
Defaults Not configured.
Command CONFIGURATION
Modes
1284
Enter the three-letter name for the time zone. This name is
displayed in the show clock output. You can enter up to
eight characters.
(OPTIONAL) Enter one of the following as the week that
daylight saving begins and then enter values for start-day
through end-time:
• week-number: Enter a number from 1 to 4 as the
number of the week in the month to start daylight saving
time.
• first: Enter this keyword to start daylight saving time in
the first week of the month.
• last: Enter this keyword to start daylight saving time in
the last week of the month.
Enter the name of the day that you want daylight saving time
to begin. Use English three letter abbreviations; for example,
Sun, Sat, Mon, and so on. The range is from Sun to Sat.
Enter the name of one of the 12 months in English.
Enter the time in hours:minutes. For the hour variable, use
the 24-hour format; example, 17:15 is 5:15 pm.
Enter the one of the following as the week that daylight
saving ends:
• week-number: enter a number from 1 to 4 as the
number of the week to end daylight saving time.
• first: enter the keyword first to end daylight saving
time in the first week of the month.
• last: enter the keyword last to end daylight saving
time in the last week of the month.
Enter the weekday name that you want daylight saving time
to end. Enter the weekdays using the three letter
abbreviations; for example Sun, Sat, Mon, and so on. The
range is from Sun to Sat.
Enter the name of one of the 12 months in English.
Enter the time in hours:minutes:seconds. For the hour
variable, use the 24-hour format; example, 17:15:00 is 5:15
pm.
(OPTIONAL) Enter the number of minutes to add during the
summer-time period. The range is from 1 to 1440. The
default is 60 minutes.
System Time and Date