Command
Version 9.2(0.0)
History
Version 8.3.16.1
Usage
After the IP DSCP bit is set, other QoS services can then operate on the bit settings.
Information
show qos class-map
View the current class map information.
Syntax
show qos class-map [class-name]
Parameters
class-name
Defaults
none
Command
•
Modes
•
Command
Version 8.3.16.1
History
Example
Dell#show qos class-map
Class-map match-any CM
Related
class-map
Commands
show qos policy-map
View the QoS policy map information.
Syntax
show qos policy-map {summary [interface] | detail [interface]}
Parameters
summary
interface
1096
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Introduced on the MXL 10/40GbE Switch IO Module.
(Optional) Enter the name of a configured class map.
EXEC
EXEC Privilege
Introduced on the MXL 10/40GbE Switch IO Module.
Match ip access-group ACL
— identifies the class map.
To view a policy map interface summary, enter the keyword
summary and optionally one of the following keywords and
slot/port or number information:
•
For a 40 Gigabit Ethernet interface, enter the keyword
FortyGigabitEthernet then the slot/port information.
•
For a 10 Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
Quality of Service (QoS)