Table of Contents
Advertisement
Command
ROUTER BGP
Modes
Command
Version 9.2(0.0)
History
Usage
When a peer group is created, it is disabled (shut mode).
Information
Related
neighbor peer-group (assigning peers)
Commands
neighbor remote-as
group.
neighbor shutdown
neighbor peer-group passive
Enable passive peering on a BGP peer group; that is, the peer group does not send an OPEN message,
but does respond to one.
Syntax
neighbor peer-group-name peer-group passive
To delete a passive peer-group, use the no neighbor peer-group-name
peer-group passive command.
Parameters
peer-group-
name
Defaults
Not configured.
Command
ROUTER BGP
Modes
Command
Version 9.2(0.0)
History
Usage
After you configure a peer group as passive, you must assign it a subnet using the
Information
neighbor subnet command.
Related
neighbor subnet
Commands
IPv6 Border Gateway Protocol (IPv6 BGP)
Introduced on the MXL 10/40GbE Switch IO Module.
— assigns routers to a peer group.
— assigns a indirectly connected AS to a neighbor or peer
— disables a peer or peer group.
Enter a text string up to 16 characters long as the name of
the peer group.
Introduced on the MXL 10/40GbE Switch IO Module.
— assigns a subnet to a dynamically configured BGP neighbor.
731
Advertisement
Table of Contents
