Logging Console - Dell MXL 10GbE Reference Manual

Defaults level = 7; size = 40960 bytes
Command CONFIGURATION
Modes
Command
Version 8.3.16.1
History
Usage When you decrease the buffer size, all messages stored in the buffer are lost.
Information Increasing the buffer size does not affect messages stored in the buffer.
Related
clear logging
Commands
default logging buffered
setting.
show logging
buffer.

logging console

Specify which messages are logged to the console.
Syntax
logging console [level]
To return to the default values, use the default logging console command.
To disable logging to the console, use the no logging console command.
Parameters
level
Defaults level = 7; size = debugging
Command CONFIGURATION
Modes
Command
Version 8.3.16.1
History
Related
clear logging
Commands
default logging console
setting.
show logging
buffer.
1244
Introduced on the MXL 10/40GbE Switch IO Module.
— clears the logging buffer.
— returns the logging buffered parameters to the default
— displays the logging setting and system messages in the internal
(OPTIONAL) Indicate a value from 0 to 7 or enter one of the
following parameters: emergencies, alerts, critical,
errors, warnings, notifications, informational, or
debugging. The default is 7 or debugging.
Introduced on the MXL 10/40GbE Switch IO Module.
— clears the logging buffer.
— returns the logging console parameters to the default
— displays the logging setting and system messages in the internal
Simple Network Management Protocol (SNMP) and Syslog