Show Ip Interface - Dell X1000 Series User Manual

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User

show ip interface

Use the show ip interface EXEC mode command to display the usability status
of configured IP interfaces.
Syntax
show ip interface [interface-id]
Parameters
interface-id
•
Default Configuration
All IP addresses.
Command Mode
User EXEC mode
Examples
Example 1 - The following example displays all configured IP addresses and
their types:
console# show ip interface
!source_precedence_is_supported &&
!broadcast_address_configuration_is_supported &&
!ip_redirects_is_supported
IP Address
-------------
10.5.230.232/24
10.5.234.202/24
Example 2 - The following example displays the IP addresses configured on the
given L2 interfaces and their types:
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 8 / 9 / 1 6 - F O R P R O O F O N L Y
380
CLI
Guide\Dell_Astute_CLI_new.fm
—Specifies an interface ID on which IP addresses are defined.
I/F I/F Status
admin/oper
------ ----------- ------- --------
vlan 1 UP/UP
vlan 4 UP/DOWN
Type Directed
Broadcast
Static disable
Static disable
Status
-----
Valid
Valid