Ip Igmp Snooping Fast-Leave - Dell MXL 10GbE Reference Manual

Defaults Disabled.
Command
•
Modes
•
Command
Version 8.3.16.1
History
Usage To enable IGMP snooping, enter this command. When you enable this command
Information from CONFIGURATION mode, IGMP snooping enables on all VLAN interfaces
(except the default VLAN).
Related shutdown
Commands

ip igmp snooping fast-leave

Enable IGMP snooping fast-leave for this VLAN.
Syntax
ip igmp snooping fast-leave
To disable IGMP snooping fast leave, use the no igmp snooping fast-leave
command.
Defaults Not configured.
Command INTERFACE VLAN — (conf-if-vl-n)
Modes
Command
Version 8.3.16.1
History
Usage Queriers normally send some queries when a leave message is received prior to
Information deleting a group from the membership database. There may be situations when
you require a fast deletion of a group. When you enable IGMP fast leave
processing, the switch removes an interface from the multicast group as soon as it
detects an IGMP version 2 leave message on the interface.
ip igmp snooping flood
This command controls the flooding behavior of unregistered multicast data packets.
Syntax
ip igmp snooping flood
Internet Group Management Protocol (IGMP)
CONFIGURATION
INTERFACE VLAN
Introduced on the MXL 10/40GbE Switch IO Module.
NOTE: Execute the no shutdown command on the VLAN interface for IGMP
Snooping to function.
— (no shutdown) activates an interface.
Introduced on the MXL 10/40GbE Switch IO Module.
549