Show Ip Pim Interface - Dell Force10 S4810P Reference Manual

Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.8.1.0
Example
E600-7-rpm0#show ip pim bsr-router
PIMv2 Bootstrap information
This system is the Bootstrap Router (v2)
This system is a candidate BSR
length: 30

show ip pim interface

View information on the interfaces with IP PIM enabled.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax show ip pim interface
Command Modes
Command History
Version 8.3.11.1
Version 8.3.12.0
Version 8.1.1.0
Version 7.8.1.0
Usage The following describes the show ip pim interface command shown in the Example
Information
below.
Field
Address
Interface
Ver/Mode
• EXEC Privilege
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
BSR address: 7.7.7.7 (?)
Uptime: 16:59:06, BSR Priority: 0, Hash mask length: 30
Next bootstrap message in 00:00:08
Candidate BSR address: 7.7.7.7, priority: 0, hash mask
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Description
Lists the IP addresses of the interfaces participating in PIM.
List the interface type, with either slot/port information or ID (VLAN
or Port Channel), of the interfaces participating in PIM.
Displays the PIM version number and mode for each interface
participating in PIM:
• v2 = PIM version 2
1247