Show Ip Pim Interface - Dell Networking 2024 Reference Manual

Command Mode
User EXEC, Privileged EXEC mode, Configuration mode and all
Configuration submodes
User Guidelines
The following information is displayed:
Field
BSR address
BSR Priority
BSR Hash Mask Length The configured hash mask length (32 bits maximum).
Next Bootstrap Message
in
Next Candidate RP
Advertisement
Example
console#show ip pim bsr-router
BSR Address............................. 192.168.10.1
BSR Priority............................ 0
BSR Hash Mask Length.................... 30
C-BSR Advertisement Interval (secs)........60
Next Bootstrap message(hh:mm:ss).......... NA
If no configured/elected BSRs exist on the router, the following message is
displayed.
No BSR's exist/learned on this router.

show ip pim interface

The show ip pim interface command displays the PIM interface status
parameters. If the interface number is not is specified, the command displays
the status parameters of all the PIM-enabled interfaces.
Syntax
show ip pim interface [vlan
Description
IP address of the BSR.
The configured BSR priority.
Time remaining (in hours, minutes, and seconds) until a
BSR message is sent.
Time remaining (in hours, minutes, and seconds) until the
next RP advertisement is sent.
vlan-id
]
Multicast Commands
1159