Show Ip Pim Interface - Dell C9000 Series Reference Manual

show ip pim interface

View information on the interfaces with IP PIM enabled.
C9000 Series
Syntax
show ip pim interface
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.5(0.0)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1
8.1.1.0
7.8.1.0
Usage Information The following describes the show ip pim interface command shown in the
following example.
Field
Address
Interface
Ver/Mode
Nbr Count
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Description
Lists the IP addresses of the interfaces participating in PIM.
List the interface type, with either slot/port information or ID
(VLAN or Port Channel), of the interfaces participating in PIM.
Displays the PIM version number and mode for each interface
participating in PIM:
•
•
Displays the number of PIM neighbors discovered over this
interface.
v2 = PIM version 2
S = PIM Sparse mode
PIM-Source Specific Mode (PIM-SSM) 1662