Show Vlan - Dell MXL 10GbE Reference Manual

•
•
•
A failed registration can occur for the following reasons:
•
•
Example
Dell#show gvrp statistics int tengig 1/0
Join Empty Received: 0
Join In Received: 0
Empty Received: 0
LeaveIn Received: 0
Leave Empty Received: 0
Leave All Received: 40
Join Empty Transmitted: 156
Join In Transmitted: 0
Empty Transmitted: 0
Leave In Transmitted: 0
Leave Empty Transmitted: 0
Leave All Transmitted: 41
Invalid Messages/Attributes skipped: 0
Failed Registrations: 0
Dell#
Related show gvrp
Commands

show vlan

Display the global VLAN configuration.
Syntax
show vlan
Command
•
Modes
•
Command
Version 8.3.16.1
History
Example
Dell# show vlan
Mirroring VLANs, P -
Primary, C - Community, I - Isolated
Q: U - Untagged, T - Tagged
untagged, V - VLT tagged
GARP VLAN Registration (GVRP)
The attribute that was being parsed had an invalid attribute length.
The attribute that was being parsed had an invalid GARP event.
The attribute that was being parsed had an invalid VLAN ID. The valid range is 1
- 4095.
Join requests were received on a port that was blocked from learning dynamic
VLANs (GVRP Blocking state).
An entry for a new GVRP VLAN could not be created in the GVRP database.
— displays the GVRP configuration.
EXEC
EXEC Privilege
Introduced on the MXL 10/40GbE Switch IO Module.
Codes: * - Default VLAN, G - GVRP VLANs, R - Remote Port
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Vlan-stack, H - VSN tagged
i - Internal untagged, I - Internal tagged, v - VLT
NUM Status Description Q Ports
543