Show Ip Pim Snooping Interface - Dell S4810 Reference Manual

224.2.217.146
224.3.3.3
225.1.2.1
225.1.2.2
229.1.2.1
229.1.2.2
Dell#
Example
Dell#sh ip pim rp mapping
(Mapping)
Group(s): 224.0.0.0/4
Dell#
Example
Dell#sh ip pim rp 229.1.2.1
(Address)
Group
229.1.2.1
Dell#

show ip pim snooping interface

Display information on VLAN interfaces with PIM-SM snooping enabled.
S4810
Syntax
show ip pim snooping interface [vlan vlan-id]
Parameters
vlan vlan-id
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version
8.3.12.0
Version 8.4.1.1
1288
165.87.20.4
165.87.20.4
165.87.20.4
165.87.20.4
165.87.20.4
165.87.20.4
RP: 165.87.20.4, v2
Info source: 165.87.20.5, via bootstrap, priority 0
Uptime: 00:03:11, expires: 00:02:46
RP: 165.87.20.3, v2
Info source: 165.87.20.5, via bootstrap, priority 0
Uptime: 00:03:11, expires: 00:03:03
RP
165.87.20.4
(OPTIONAL) Enter a VLAN ID to display information about a
specified VLAN configured for PIM-SM snooping. The valid
VLAN IDs range is from 1 to 4094.
EXEC
EXEC Privilege
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
PIM-Sparse Mode (PIM-SM)