Display Ripng Interface - 3Com S7906E Command Reference Manual

Description
Use the display ripng database command to display all active routes in the RIPng advertising
database, which are sent in normal RIPng update messages.
Examples
# Display the active routes in the database of RIPng process 100.
<Sysname> display ripng 100 database
2001:7B::2:2A1:5DE/64,
cost 4, Imported
1:13::/120,
cost 4, Imported
1:32::/120,
cost 4, Imported
1:33::/120,
cost 4, Imported
100::/32,
via FE80::200:5EFF:FE04:3302, cost 2
3FFE:C00:C18:1::/64,
via FE80::200:5EFF:FE04:B602, cost 2
3FFE:C00:C18:1::/64,
via FE80::200:5EFF:FE04:B601, cost 2
3FFE:C00:C18:2::/64,
via FE80::200:5EFF:FE04:B602, cost 2
3FFE:C00:C18:3::/64,
via FE80::200:5EFF:FE04:B601, cost 2
4000:1::/64,
via FE80::200:5EFF:FE04:3302, cost 2
4000:2::/64,
via FE80::200:5EFF:FE04:3302, cost 2
1111::/64,
cost 0, RIPng-interface
Table 1-2 display ripng database command output description
Field
2001:7B::2:2A1:5DE/64
via
cost
Imported
RIPng-interface

display ripng interface

Syntax
display ripng process-id interface [ interface-type interface-number ]
Description
IPv6 destination address/prefix length
Next hop IPv6 address
Route metric value
Route redistributed from another routing protocol
Route learned from the interface
1-4