Display Dhcp-Snooping Trust; Reset Dhcp-Snooping - 3Com S7906E Command Reference Manual

DHCP packets sent
Packets dropped due to rate limitation : 20
Dropped invalid packets

display dhcp-snooping trust

Syntax
display dhcp-snooping trust
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display dhcp-snooping trust command to display information about trusted ports.
Related commands: dhcp-snooping trust.
Examples
# Display information about trusted ports.
<Sysname> display dhcp-snooping trust
DHCP Snooping is enabled.
DHCP Snooping trust becomes active.
Interface
=========================
GigabitEthernet2/0/1
The above output shows that DHCP snooping is enabled, DHCP snooping trust is active, and port
GigabitEthernet 2/0/1 is trusted.

reset dhcp-snooping

Syntax
reset dhcp-snooping { all | ip ip-address }
View
User view
Default Level
1: Monitor level
Parameters
all: Clears all DHCP snooping binding information.
ip ip-address: Clears the DHCP snooping binding information of the specified IP address.
: 200
: 0
Trusted
============
Trusted
4-11