Ipv6; Ipv6 Address - 3Com S7906E Command Reference Manual

Description
Use the dns server ipv6 command to specify a DNS server.
Use the undo dns server ipv6 command to remove the specified DNS server.
By default, no DNS server is configured.
Examples
# Specify a DNS server at 2002::1.
<Sysname> system-view
[Sysname] dns server ipv6 2002::1

ipv6

Syntax
ipv6
undo ipv6
View
System view
Default Level
2: System level
Parameters
None
Description
Use the ipv6 command to enable IPv6.
Use the undo ipv6 command to disable IPv6.
By default, IPv6 is disabled.
Examples
# Enable IPv6.
<Sysname> system-view
[Sysname] ipv6

ipv6 address

Syntax
ipv6 address { ipv6-address prefix-length | ipv6-address/prefix-length }
undo ipv6 address [ ipv6-address prefix-length | ipv6-address/prefix-length ]
View
Interface view
1-21