Dhcp Relay Agent Configuration Commands; Dhcp Relay Address-Check - 3Com S7906E Command Reference Manual

2

DHCP Relay Agent Configuration Commands

The DHCP relay agent configuration is supported only on VLAN interfaces.
DHCP snooping cannot be configured on the DHCP relay agent.
DHCP Relay Agent Configuration Commands

dhcp relay address-check

Syntax
dhcp relay address-check { disable | enable }
View
Interface view
Default Level
2: System level
Parameters
disable: Disables IP address match check on the relay agent.
enable: Enables IP address match check on the relay agent.
Description
Use the dhcp relay address-check enable command to enable IP address match check on the relay
agent.
Use the dhcp relay address-check disable command to disable IP address match check on the relay
agent.
By default, the function is disabled.
Note that: The dhcp relay address-check enable command only checks IP and MAC addresses of
clients.
Examples
# Enable IP address match check on the DHCP relay agent.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] dhcp relay address-check enable
2-1