Display Isis Interface - 3Com S7906E Command Reference Manual

Table 1-2 display isis graceful-restart status command output description
Field
Restart Interval
SA Bit Supported
Total Number of Interfaces = 1
Restart Status:
Number of LSPs Awaited
T3 Timer Status
T2 Timer Status:

display isis interface

Syntax
display isis interface [ statistics | [ interface-type interface-number ] [ verbose ] ] [ process-id |
vpn-instance vpn-instance-name ]
View
Any view
Default Level
1: Monitor level
Parameters
statistics: Displays IS-IS interface statistics information.
interface-type interface-number: IS-IS interface whose statistics information is to be displayed.
verbose: Displays detailed IS-IS interface information.
process-id: Displays the IS-IS interface information of the IS-IS process. The ID is in the range of 1 to
65535.
vpn-instance-name: Displays the IS-IS interface information of the VPN instance. The name is a string
of 1 to 31 characters.
Description
Use the display isis interface command to display IS-IS interface information.
Examples
# Display brief IS-IS interface information.
<Sysname> display isis interface
Interface: Vlan-interface1
Id IPV4.State
001 Up
Graceful Restart interval
The SA bit is set
The current IS-IS interface number
Graceful Restart status
Number of LSPs not obtained by the GR restarter from GR
helpers during LSDB synchronization
Remaining time of T3 timer
Remaining time of T2 Timer
Interface information for ISIS(1)
---------------------------------
IPV6.State MTU
Down 1497
1-9
Description
Type DIS
L1/L2 No/No