Display Dhcp-Snooping Packet Statistics - 3Com S7906E Command Reference Manual

Interface: GigabitEthernet 2/0/1
Status: Enable
Strategy: Replace
Format: Verbose
Circuit ID format-type: HEX
Remote ID format-type: ASCII
Node identifier: aabbcc
User defined:
Circuit ID: company001
Interface: GigabitEthernet 2/0//2
Status: Disable
Strategy: Keep
Format: Normal
Circuit ID format-type: HEX
Remote ID format-type: ASCII
User defined:
Circuit ID: company001
Remote ID: device001
VLAN 10:
Circuit ID: vlan10@company001
VLAN 20:
Remote ID: device001

display dhcp-snooping packet statistics

Syntax
display dhcp-snooping packet statistics [ slot slot-number ]
View
Any view
Default Level
1: Monitor level
Parameters
slot slot-number: Displays the DHCP packet statistics of the board in a specified slot.
Description
Use the display dhcp-snooping packet statistics command to display DHCP packet statistics on the
DHCP snooping device.
On the S7900E series Ethernet switches, executing the display dhcp-snooping packet statistics
command without the slot keyword only displays DHCP packet statistics on the SRPU.
Examples
# Display DHCP packet statistics on the DHCP snooping device.
<Sysname> display dhcp-snooping packet statistics
DHCP packets received : 100
4-10