Table of Contents
Advertisement
Quick Links
I
NTRODUCTION
®
The SuperStack
II Baseline Dual Speed Hub is an easy-to-use,
10/100 autosensing Class II hub (repeater). It is ideal for users who
want to connect both Ethernet and Fast Ethernet devices
(workstations and other equipment) to the same hub.
All ports on the Baseline Dual Speed Hub are half duplex,
autosensing 10 Mbps and 100 Mbps. Each port senses the speed of
the connected equipment and operates at the appropriate speed.
The Baseline Dual Speed Hub comes with:
One power cord for use with the Baseline Dual Speed Hub
Four full height and two reduced height, self-adhesive rubber
pads
One rack mounting kit
A Registration Card and Envelope for you to fill in and return
This Guide
®
SuperStack
II Baseline Dual Speed Hub
12-Port TP (3C16592A) and 24-Port TP (3C16593A)
User Guide
DUA1659-2AAA03
3 C 1
6 5 9
3 A
The Baseline Dual Speed Hub is suitable for office use where it can
be free standing or rack-mounted (in a wiring closet or equipment
room). The hub can be powered either from the AC mains supply, or
through an optional 3Com
Power System (3C16071A). Contact your supplier for details.
Network Connections
The Baseline Dual Speed Hub has 12 or 24 shielded RJ-45, 10/100
autosensing ports on the front panel. Each port can be connected to
either a 10BASE-T (Ethernet) or a 100BASE-TX (Fast Ethernet) device.
Internally, the hub has two repeater segments (10 Mbps and
100 Mbps) which are linked by a switch, allowing connected
10 Mbps and 100 Mbps devices to communicate.
You can connect a 10BASE-T or 100BASE-TX hub or switch to the
Baseline Dual Speed Hub.
1
®
SuperStack II Advanced Redundant
Advertisement
Table of Contents
Related Manuals for 3Com SuperStack II 3C16592A
Summary of Contents for 3Com SuperStack II 3C16592A
- Page 1 The Baseline Dual Speed Hub is suitable for office use where it can be free standing or rack-mounted (in a wiring closet or equipment room). The hub can be powered either from the AC mains supply, or through an optional 3Com Power System (3C16071A). Contact your supplier for details. Network Connections The Baseline Dual Speed Hub has 12 or 24 shielded RJ-45, 10/100 autosensing ports on the front panel.
-
Page 2: Front Panel
OW TO Figure 1 Numbered elements in this diagram refer to numbered sections in the text. A 24-port Hub is shown. Front Panel 12 or 24 RJ-45 10/100 Ports You can use these ports to connect 10BASE-T or 100BASE-TX devices (workstations and other equipment) to the Baseline Dual Speed Hub. -
Page 3: Rear Panel Connections
Dual Speed Hub, or a power cord of the same type and rating. Socket for Redundant Power System You can connect a 3Com SuperStack II Advanced Redundant Power System (ARPS) (3C16071A) to the Hub. The ARPS is designed to maintain the power to your Hub if a power supply failure occurs. - Page 4 Dual Speed Hub to sense the speed of the network incorrectly. We strongly recommend that you install the latest versions of the NIC drivers before connecting your network. 3Com NIC card drivers dated before 23/03/95 should be updated from the 3Com website. 440 mm (17.3 in.) 173 mm (6.8 in.)
-
Page 5: S Afety I Nformation
(Sicherheitskleinstspannung) gemäß IEC 60950. Diese Bedingungen sind nur gegeben, wenn auch die an das Gerät angeschlossenen Geräte unter SELV-Bedingungen betrieben werden. Nur ein 3Com Advanced Redundant Power System (3C16070, 3C16071 or 3C16071A) an den Redundant Power System Anschluß anschließen. Das Netzkabel muß vom Typ HO3VVF3GO.75 (Mindestanforderung) sein und die Aufschrift <HAR>... -
Page 6: Limited Warranty
(90) days from the date of purchase from 3Com or its authorized reseller. 3Com warrants the media containing software against failure during the war- ranty period. - Page 7 LECTRO FCC Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
-
Page 8: Environmental Statement
Contact your supplier for the latest product information and to order these products. Product Registration You can now register your SuperStack II Switch on the 3Com web site to receive up-to-date information on your product: http://www.3com.com/productreg/pdd Feedback Your suggestions are very important to us.