Startup-Query-Interval (Igmp View); Timer Other-Querier-Present (Igmp View) - 3Com S7906E Command Reference Manual

Examples
# Set the startup query count to 3 globally in the public instance.
<Sysname> system-view
[Sysname] igmp
[Sysname-igmp] startup-query-count 3

startup-query-interval (IGMP view)

Syntax
startup-query-interval interval
undo startup-query-interval
View
Public instance IGMP view, VPN instance IGMP view
Default Level
2: System level
Parameters
interval: Startup query interval in seconds, namely, the interval between general queries the IGMP
querier sends on startup, with an effective range of 1 to 18000.
Description
Use the startup-query-interval command to configure the startup query interval globally.
Use the undo startup-query-interval command to restore the system default.
By default, the startup query interval is 1/4 of the "IGMP query interval".
By default, the IGMP query interval is 60 seconds, so the startup query interval = 60 / 4 = 15 (seconds).
Related commands: igmp-startup-query-interval, timer query.
Examples
# Set the startup query interval to 5 seconds globally in the public instance.
<Sysname> system-view
[Sysname] igmp
[Sysname-igmp] startup-query-interval 5

timer other-querier-present (IGMP view)

Syntax
timer other-querier-present interval
1-29