Reset Dhcp-Snooping Packet Statistics - 3Com S7906E Command Reference Manual

Description
Use the reset dhcp-snooping command to clear DHCP snooping binding information.
For the S7900E series Ethernet switches, DHCP snooping binding information on all slots will be
cleared after you execute this command.
Examples
# Clear all DHCP binding information.
<Sysname> reset dhcp-snooping all

reset dhcp-snooping packet statistics

Syntax
reset dhcp-snooping packet statistics [ slot slot-number ]
View
User view
Default Level
2: System level
Parameters
slot slot-number: Clears the DHCP packet statistics of the board in a specified slot.
Description
Use the reset dhcp-snooping packet statistics command to clear DHCP packet statistics on the
DHCP snooping device.
On the S7900E series Ethernet switches, executing the reset dhcp-snooping packet statistics
command without the slot keyword only clears DHCP packet statistics on the SRPU.
Examples
# Clear DHCP packet statistics on the DHCP snooping device.
<Sysname> reset dhcp-snooping packet statistics
4-12