C-Bsr Admin-Scope - 3Com S7906E Command Reference Manual

Parameters
interface-type interface-number: Specifies an interface by its type and number. This configuration can
take effect only if PIM-SM is enabled on the interface.
hash-length: Hash mask length, in the range of 0 to 32. If you do not include this argument in your
command, the corresponding global setting will be used.
priority: Priority of the C-BSR, in the range of 0 to 255. If you do not include this argument in your
command, the corresponding global setting will be used. A larger value of this argument means a higher
priority.
Description
Use the c-bsr command to configure the specified interface as a C-BSR.
Use the undo c-bsr command to remove the related C-BSR configuration.
No C-BSR is configured by default.
Note that PIM-SM must be enabled on the interface to be configured as a C-BSR.
Related commands: pim sm, c-bsr hash-length, c-bsr priority, c-rp.
Examples
# Configure VLAN-interface 100 to be a C-BSR.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] c-bsr vlan-interface 100

c-bsr admin-scope

Syntax
c-bsr admin-scope
undo c-bsr admin-scope
View
Public instance PIM view, VPN instance PIM view
Default Level
2: System level
Parameters
None
Description
Use the c-bsr admin-scope command to enable administrative scoping.
Use the undo c-bsr admin-scope command to disable administrative scoping.
By default, BSR administrative scoping is disabled, namely there is only one BSR in a PIM-SM domain.
Related commands: c-bsr, c-bsr group, c-bsr global.
1-3