Display Bgp Routing-Table - 3Com S7906E Command Reference Manual

Optional capabilities
Peer Preferred Value
BFD
Routing policy configured

display bgp routing-table

Syntax
display bgp routing-table [ ip-address [ { mask | mask-length } [ longer-prefixes ] ] ]
View
Any view
Default Level
1: Monitor level
Parameters
ip-address: Destination IP address.
mask: Network mask, in dotted decimal notation.
mask-length: Mask length, in the range 0 to 32.
longer-prefixes: Matches the longest prefix.
Description
Use the display bgp routing-table command to display specified BGP routing information in the BGP
routing table.
Examples
# Display BGP routing table information.
<Sysname> display bgp routing-table
Total Number of Routes: 1
BGP Local router ID is 10.10.10.1
Status codes: * - valid, > - best, d - damped,
Network
*> 40.40.40.0/24
Field
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
NextHop
20.20.20.1
Description
Optional capabilities enabled by the peer
Preferred value specified for the routes from the peer
BFD is enabled or disabled.
Local routing policy
MED LocPrf
1-19
PrefVal Path/Ogn
0 200 300i