Display Bgp Multicast Routing-Table - 3Com S7906E Command Reference Manual

Routing policy configured

display bgp multicast routing-table

Syntax
display bgp multicast routing-table [ ip-address [ { mask | mask-length } [ longer-prefixes ] ] ]
View
Any view
Default Level
1: Monitor level
Parameters
ip-address: Destination IP address.
mask: Network mask, in dotted decimal notation.
mask-length: Mask length, in the range 0 to 32.
longer-prefixes: Matches the longest prefix.
Description
Use the display bgp multicast routing-table command to display IPv4 MBGP routing information.
Examples
# Display the IPv4 MBGP routing table.
<Sysname> display bgp multicast routing-table
Total Number of Routes: 1
BGP Local router ID is 10.10.10.1
Status codes: * - valid, > - best, d - damped,
Network
*> 40.40.40.0/24
Table 1-8 display bgp multicast routing-table command output description
Field
Total Number of Routes
BGP Local router ID
Field
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
NextHop
20.20.20.1
Total Number of Routes
BGP local router ID
Description
Local route policy
MED LocPrf
Description
1-18
PrefVal Path/Ogn
0 200 300i