Sflow Sampling-Mode; Sflow Sampling-Rate - 3Com S7906E Command Reference Manual

sflow sampling-mode

Syntax
sflow sampling-mode { determine | random }
undo sflow sampling-mode
View
Interface view
Default Level
2: System level
Parameters
determine: Indicates to sample a fixed number of packets.
random: Indicates to sample packets randomly.
Description
Use the sflow sampling-mode command to specify the packet sampling mode.
Use the undo sflow sampling-mode command to restore the default.
By default, the packet sampling mode is random.
Note that this command should be used after sFlow is enabled on the current port.
Currently, the determine mode is not supported on S7900E series Ethernet switches.
Examples
# Specify the sFlow sampling mode as random on GigabitEthernet 2/0/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 2/0/1
[Sysname-GigabitEthernet2/0/1] sflow enable inbound
[Sysname-GigabitEthernet2/0/1] sflow sampling-mode random

sflow sampling-rate

Syntax
sflow sampling-rate rate
undo sflow sampling-rate
View
Interface view
1-5