Balance (Bgp/Bgp-Vpn Instance View) - 3Com S7906E Command Reference Manual

suppress-policy route-policy-name: Suppresses specific routes defined in the routing policy. The
routing policy name is a string of 1 to 19 characters.
origin-policy route-policy-name: References the routing policy to specify routes for summarization.
The routing policy name is a string of 1 to 19 characters.
The keywords of the command are described as follows:
Table 1-1 Functions of the keywords
Keywords
as-set
detail-suppressed
suppress-policy
origin-policy
attribute-policy
Description
Use the aggregate command to create a summary route in the BGP routing table.
Use the undo aggregate command to remove a summary route.
By default, no summary route is configured.
Examples
# In BGP view, create a summary of 192.213.0.0/16 in the BGP routing table.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] aggregate 192.213.0.0 255.255.0.0
# In BGP-VPN instance view, create a summary of 192.213.0.0/16 in BGP routing table (the VPN has
been created).
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] aggregate 192.213.0.0 255.255.0.0

balance (BGP/BGP-VPN instance view)

Syntax
balance number
undo balance
Used to create a summary route, whose AS path contains the AS path
information of summarized routes. Use this keyword carefully when many
AS paths need to be summarized, because the frequent changes of
these specific routes may lead to route oscillation.
This keyword does not suppress the summary route, but it suppresses
the advertisement of all the more specific routes. To summarize only
some specific routes, use the peer filter-policy command.
Used to create a summary route and suppress the advertisement of
some summarized routes. If you want to suppress some routes
selectively and leave other routes still advertised, use the if-match
clause of the route-policy command.
Selects only routes satisfying the routing policy for route summarization.
Sets attributes except the AS-PATH attribute for the summary route. The
same work can be done by using the peer route-policy command.
1-2
Function