Display Ip Community-List - 3Com S7906E Command Reference Manual

Description
Use the display ip as-path command to display BGP AS-PATH list information.
Information about all BGP AS-PATH lists will be displayed if no as-path-number is specified.
Related commands: ip as-path, if-match as-path, apply as-path.
Examples
# Display the information of BGP AS-PATH list 1.
<Sysname> display ip as-path 1
ListID Mode
1 permit
Table 1-1 display ip as-path command output description
ListID
Mode
Expression

display ip community-list

Syntax
display ip community-list [ basic-community-list-number | adv-community-list-number ]
View
Any view
Default Level
1: Monitor level
Parameters
basic-community-list-number: Basic community list number, in the range of 1 to 99.
adv-community-list-number: Advanced community list number, in the range of 100 to 199.
Description
Use the display ip community-list command to display BGP community list information.
All BGP community list information will be displayed if no basic-community-list-number or
adv-community-list-number is specified.
Related commands: ip community-list, if-match community, apply community.
Examples
# Display the information of the BGP community list 1.
<Sysname> display ip community-list 1
Community List Number 1
permit
Expression
2
Field
1:1 1:2 2:2
AS-PATH list ID
Matching mode: permit, deny
Regular expression for matching
1-11
Description